Hoopers Mill Chimney Repairs Required? It’s Not Hard to Identify the Warnings

Proof that a Hoopers Mill home’s chimney needs repairs isn’t hard to identify.

Bricks, or chips from bricks, on the ground next to the chimney. Discoloration of remaining bricks in the structure. Noticeable gaps between bricks. Efflorescence – a white, chalky powder – coating your Hoopers Mill chimney’s exterior.

Inside the house, discoloration or efflorescence inside the fireplace is a red flag, too.

Each indicator might have a different source. Waiting to act isn’t recommended, though. Problems can rapidly worsen. The first step is a chimney and fireplace inspection by Butler Chimneys, the top chimney sweep company in Hoopers Mill.

The common factor in almost every chimney issue is water. Sometimes the cause is cracked or damaged flue tiles inside the chimney, which permit moisture to seep into the chimney cavity. If a water heater vents into the chimney, the issue can be far worse. Either way, problems ensue once moisture has direct contact with masonry.

Gaps in a chimney – from missing bricks, or failed mortar joints – are major warnings. Hoopers Mill rains can directly leak inside the chimney cavity, making a bad situation far worse.

The initial step is to confront root causes. If flue tiles have lost their structural integrity, putting in a stainless steel chimney liner generally stops internal moisture problems. The damage to the chimney remains, though.

Tuckpointing - grinding out and replacing deteriorated mortar – is sometimes all that’s involved. Adding optional ChimneySaver water repellent tacks five years onto Butler Chimneys’ standard five-year warranty, guaranteeing a decade of protection from the elements.

If the source of water leakage is a cracked chimney crown, two options are available. A stainless steel chimney cap can be mounted atop the crown, creating an “umbrella” over the chimney. Or, if the crown is too deteriorated, a new one is poured.

If a chimney is beyond saving, a full or partial rebuild is in line. A masonry project runs three to five days; for appliance chimneys, usually one day. You and your Hoopers Mill neighbors can expect scaffolding to be put up, or a temporary rooftop construction station built.

The chimney is reconstructed with fresh bricks and new mortar to building code height. Butler Chimneys works to match colors of new bricks to originals; bricks can be stained, if needed.

A new 5-inch-thick concrete crown is poured on top. The crown features a 2-inch overhang to keep water off the new chimney below. Your new chimney is as attractive as it is functional!

If you identify symptoms of a deteriorating chimney, what’s the problem … and the fix? Only inspection by a qualified chimney company can find the answers. Time, though, is of the essence – contact Butler Chimneys before additional (or worse) symptoms show up!