Holy Cross Chimney Repairs Required? It’s Not Hard to Find the Warnings

Indication that a Holy Cross home’s chimney requires repairs isn’t hard to find.

Bricks, or chips from bricks, on the ground next to the chimney. Staining of remaining bricks in the structure. Obvious gaps between bricks. Efflorescence – a white, chalky powder – on your Holy Cross chimney’s exterior.

Inside a house, staining or efflorescence inside the fireplace is a red flag, too.

Each symptom might have a different source. Hesitating to act isn’t smart, though. Problems can quickly worsen. The first step is a chimney and fireplace inspection by Butler Chimneys, the top chimney sweep company in Holy Cross.

The underlying source in almost every chimney issue is water. Often the cause is cracked or damaged flue tiles inside the chimney, which allow moisture to seep into the chimney cavity. If a water heater vents into the chimney, the problem can be far worse. Either way, problems start once moisture has direct contact with masonry.

Gaps in a chimney – from missing bricks, or failed mortar joints – are serious red flags. Holy Cross rains can directly leak inside the chimney cavity, making a bad scenario far worse.

The first step is to address root causes. If flue tiles have lost their structural integrity, putting in a stainless steel chimney liner usually stops internal moisture issues. The damage to the chimney remains, though.

Tuckpointing - grinding out and replacing deteriorated mortar – is sometimes all that’s needed. Adding optional ChimneySaver water repellent tacks five years onto Butler Chimneys’ normal five-year warranty, promising a decade of protection from the elements.

If the source of water leakage is a cracked chimney crown, two options are available. A stainless steel chimney cap can be mounted atop the crown, creating an “umbrella” over the chimney. Or, if the crown is too weakened, a new one is poured.

If a chimney is beyond saving, a full or partial rebuild is in line. A masonry project runs three to five days; for appliance chimneys, usually one day. You and your Holy Cross neighbors can expect scaffolding to be put up, or a temporary rooftop construction station built.

The chimney is rebuilt with fresh bricks and new mortar to building code height. Butler Chimneys works to match colors of new bricks to originals; bricks can be stained, if needed.

A new 5-inch-thick concrete crown is poured on top. The crown features a 2-inch overhang to keep water off the new chimney below. Your new chimney is as beautiful as it is functional!

If you spot symptoms of a deteriorating chimney, what’s the problem … and the remedy? Only inspection by a qualified chimney company can find the answers. Time, though, is of the essence – contact Butler Chimneys before additional (or worse) symptoms show up!