Rugby Junction Chimney Repairs Required? It’s Not Difficult to Spot the Symptoms

Proof that a Rugby Junction home’s chimney needs repairs isn’t difficult to find.

Bricks, or chips from bricks, on the ground next to the chimney. Discoloration of remaining bricks in the structure. Obvious gaps between bricks. Efflorescence – a white, chalky powder – on your Rugby Junction chimney’s exterior.

Inside the home, discoloration or efflorescence inside the fireplace is a warning, too.

Each sign might have a different cause. Hesitating to act isn’t advisable, though. Problems can rapidly worsen. The first step is a chimney and fireplace inspection by Butler Chimneys, the top chimney sweep company in Rugby Junction.

The underlying source in nearly every chimney issue is water. Sometimes the cause is cracked or damaged flue tiles inside the chimney, which allow moisture to enter into the chimney cavity. If a water heater vents into the chimney, the issue can be far worse. Either way, problems begin once moisture has direct contact with masonry.

Gaps in a chimney – from absent bricks, or failed mortar joints – are serious red flags. Rugby Junction rains can directly leak inside the chimney cavity, making a bad scenario far worse.

The initial step is to confront root causes. If flue tiles have lost their structural integrity, putting in a stainless steel chimney liner usually stops internal moisture issues. The damage to the chimney remains, though.

Tuckpointing - grinding out and replacing deteriorated mortar – is sometimes all that’s involved. Adding optional ChimneySaver water repellent tacks five years onto Butler Chimneys’ regular five-year warranty, promising a decade of protection from the elements.

If the source of water leakage is a cracked chimney crown, two options exist. A stainless steel chimney cap can be mounted atop the crown, forming an “umbrella” above the chimney. Or, if the crown is too weakened, a new one is poured.

If a chimney is beyond recovery, a full or partial rebuild is in line. A masonry project takes three to five days; for appliance chimneys, usually one day. You and your Rugby Junction neighbors can expect scaffolding to be erected, or a temporary rooftop construction station built.

The chimney is reconstructed with fresh bricks and new mortar to building code height. Butler Chimneys works to match colors of new bricks to originals; bricks can be stained, if needed.

A new 5-inch-thick concrete crown is poured on top. The crown uses a 2-inch overhang to keep water off the new chimney beneath. Your new chimney is as beautiful as it is functional!

If you spot symptoms of a failing chimney, what’s the issue … and the remedy? Only inspection by a qualified chimney company can find the answers. Time, though, is of the essence – contact Butler Chimneys before more (or worse) symptoms appear!