Eagle Chimney Repairs Needed? It’s Not Difficult to Identify the Warnings

Proof that a Eagle home’s chimney requires repairs isn’t hard to spot.

Bricks, or chips from bricks, on the ground next to the chimney. Discoloration of remaining bricks in the structure. Obvious gaps between bricks. Efflorescence – a white, chalky powder – lining your Eagle chimney’s exterior.

Inside a house, discoloration or efflorescence inside the fireplace is a red flag, too.

Each symptom might have a different cause. Waiting to act isn’t wise, though. Problems can rapidly worsen. The initial step is a chimney and fireplace inspection by Butler Chimneys, the top chimney sweep company in Eagle.

The common factor in nearly every chimney problem is water. Sometimes the culprit is cracked or damaged flue tiles inside the chimney, which allow moisture to seep into the chimney cavity. If a water heater vents into the chimney, the situation can be far worse. Either way, problems begin once moisture has direct contact with masonry.

Gaps in a chimney – from absent bricks, or compromised mortar joints – are major warnings. Eagle rains can directly leak inside the chimney cavity, making a bad situation far worse.

The first step is to confront root causes. If flue tiles have lost their structural integrity, putting in a stainless steel chimney liner typically stops internal moisture issues. The damage to the chimney remains, though.

Tuckpointing - grinding out and replacing deteriorated mortar – is occasionally all that’s involved. Adding optional ChimneySaver water repellent tacks five years onto Butler Chimneys’ standard five-year warranty, guaranteeing a decade of protection from the elements.

If the source of water leakage is a cracked chimney crown, two options exist. A stainless steel chimney cap can be mounted atop the crown, creating an “umbrella” over the chimney. Or, if the crown is too deteriorated, a new one is poured.

If a chimney is beyond recovery, a full or partial rebuild is in order. A masonry project takes three to five days; for appliance chimneys, usually one day. You and your Eagle neighbors can expect scaffolding to be erected, or a temporary rooftop construction station built.

The chimney is reconstructed with fresh bricks and new mortar to building code height. Butler Chimneys works to match colors of new bricks to originals; bricks can be stained, if needed.

A new 5-inch-thick concrete crown is poured on top. The crown uses a 2-inch overhang to keep water off the new chimney beneath. Your new chimney is as attractive as it is functional!

If you identify symptoms of a failing chimney, what’s the problem … and the remedy? Only inspection by a qualified chimney company can tell. Time, though, is of the essence – contact Butler Chimneys before additional (or worse) symptoms appear!