Goerkes Corner Chimney Repairs Needed? It’s Not Difficult to Identify the Symptoms

Proof that a Goerkes Corner home’s chimney requires repairs isn’t hard to identify.

Bricks, or chips from bricks, on the ground next to the chimney. Staining of remaining bricks in the structure. Obvious gaps between bricks. Efflorescence – a white, chalky powder – lining your Goerkes Corner chimney’s exterior.

Inside the home, discoloration or efflorescence inside the fireplace is a warning, too.

Each sign might have a different cause. Waiting to act isn’t recommended, though. Problems can rapidly worsen. The initial step is a chimney and fireplace inspection by Butler Chimneys, the top chimney sweep company in Goerkes Corner.

The underlying source in almost every chimney problem is water. Often the cause is cracked or damaged flue tiles inside the chimney, which allow moisture to seep into the chimney cavity. If a water heater vents into the chimney, the problem can be far worse. Either way, problems start when moisture has direct contact with masonry.

Gaps in a chimney – from missing bricks, or failed mortar joints – are major red flags. Goerkes Corner rains can directly leak inside the chimney cavity, making a bad situation far worse.

The initial step is to confront root causes. If flue tiles have lost their structural integrity, putting in a stainless steel chimney liner typically stops internal moisture issues. The harm to the chimney remains, though.

Tuckpointing - grinding out and replacing deteriorated mortar – is occasionally all that’s required. Adding optional ChimneySaver water repellent tacks five years onto Butler Chimneys’ standard five-year warranty, guaranteeing a decade of protection from the elements.

If the source of water leakage is a cracked chimney crown, two options are available. A stainless steel chimney cap can be mounted atop the crown, forming an “umbrella” over the chimney. Or, if the crown is too damaged, a new one is poured.

If a chimney is beyond recovery, a full or partial rebuild is in line. A masonry project takes three to five days; for appliance chimneys, usually one day. You and your Goerkes Corner neighbors can expect scaffolding to be put up, or a temporary rooftop construction station built.

The chimney is rebuilt with fresh bricks and new mortar to building code height. Butler Chimneys works to match colors of new bricks to originals; bricks can be stained, if needed.

A new 5-inch-thick concrete crown is poured on top. The crown features a 2-inch overhang to keep water off the new chimney below. Your new chimney is as attractive as it is functional!

If you notice symptoms of a deteriorating chimney, what’s the issue … and the remedy? Only inspection by a qualified chimney company can tell. Time, though, is of the essence – contact Butler Chimneys before additional (or worse) symptoms show up!