Hartland Chimney Repairs Needed? It’s Not Hard to Identify the Warnings

Proof that a Hartland home’s chimney requires repairs isn’t difficult to find.

Bricks, or chips from bricks, on the ground next to the chimney. Discoloration of remaining bricks in the structure. Obvious gaps between bricks. Efflorescence – a white, chalky powder – on your Hartland chimney’s exterior.

Inside a house, staining or efflorescence inside the fireplace is a warning, too.

Each sign might have a different source. Hesitating to act isn’t wise, though. Complications can quickly worsen. The first step is a chimney and fireplace inspection by Butler Chimneys, the top chimney sweep company in Hartland.

The underlying reason in nearly every chimney problem is water. Sometimes the culprit is cracked or damaged flue tiles inside the chimney, which allow moisture to seep into the chimney cavity. If a water heater vents into the chimney, the problem can be far worse. Either way, problems begin once moisture has direct contact with masonry.

Gaps in a chimney – from missing bricks, or failed mortar joints – are serious warnings. Hartland rains can directly penetrate inside the chimney cavity, making a bad situation far worse.

The first step is to confront root causes. If flue tiles have lost their structural integrity, putting in a stainless steel chimney liner usually stops internal moisture issues. The damage to the chimney remains, though.

Tuckpointing - grinding out and replacing deteriorated mortar – is occasionally all that’s involved. Adding optional ChimneySaver water repellent tacks five years onto Butler Chimneys’ regular five-year warranty, guaranteeing a decade of protection from the elements.

If the source of water leakage is a cracked chimney crown, two options are available. A stainless steel chimney cap can be mounted atop the crown, forming an “umbrella” over the chimney. Or, if the crown is too damaged, a new one is poured.

If a chimney is beyond restoration, a full or partial rebuild is in line. A masonry project runs three to five days; for appliance chimneys, usually one day. You and your Hartland neighbors can expect scaffolding to be put up, or a temporary rooftop construction station built.

The chimney is reconstructed with fresh bricks and new mortar to building code height. Butler Chimneys works to match colors of new bricks to originals; bricks can be stained, if needed.

A new 5-inch-thick concrete crown is poured on top. The crown employs a 2-inch overhang to keep water off the new chimney below. Your new chimney is as beautiful as it is functional!

If you identify symptoms of a failing chimney, what’s the problem … and the remedy? Only inspection by a qualified chimney company can find the answers. Time, though, is of the essence – contact Butler Chimneys before additional (or worse) symptoms show up!