Marcy Chimney Repairs Needed? It’s Not Difficult to Spot the Warnings

Indication that a Marcy home’s chimney requires repairs isn’t hard to find.

Bricks, or chips from bricks, on the ground next to the chimney. Discoloration of remaining bricks in the structure. Obvious gaps between bricks. Efflorescence – a white, chalky powder – lining your Marcy chimney’s exterior.

Inside a house, staining or efflorescence inside the fireplace is a red flag, too.

Each symptom might have a different cause. Hesitating to act isn’t recommended, though. Problems can quickly worsen. The first step is a chimney and fireplace inspection by Butler Chimneys, the top chimney sweep company in Marcy.

The underlying reason in nearly every chimney issue is water. Often the culprit is cracked or damaged flue tiles inside the chimney, which allow moisture to escape into the chimney cavity. If a water heater vents into the chimney, the problem can be far worse. Either way, problems start once moisture has direct contact with masonry.

Gaps in a chimney – from absent bricks, or compromised mortar joints – are serious red flags. Marcy rains can directly penetrate inside the chimney cavity, making a bad scenario far worse.

The first step is to confront root causes. If flue tiles have lost their structural integrity, installing a stainless steel chimney liner usually stops internal moisture problems. The damage to the chimney remains, though.

Tuckpointing - grinding out and replacing deteriorated mortar – is occasionally all that’s required. Adding optional ChimneySaver water repellent tacks five years onto Butler Chimneys’ standard five-year warranty, promising a decade of protection from the elements.

If the source of water leakage is a damaged chimney crown, two options are available. A stainless steel chimney cap can be mounted atop the crown, creating an “umbrella” above the chimney. Or, if the crown is too weakened, a new one is poured.

If a chimney is beyond saving, a full or partial rebuild is in order. A masonry project runs three to five days; for appliance chimneys, usually one day. You and your Marcy neighbors can expect scaffolding to be erected, or a temporary rooftop construction station built.

The chimney is reconstructed with fresh bricks and new mortar to building code height. Butler Chimneys works to match colors of new bricks to originals; bricks can be stained, if needed.

A new 5-inch-thick concrete crown is poured on top. The crown uses a 2-inch overhang to keep water off the new chimney below. Your new chimney is as beautiful as it is functional!

If you notice symptoms of a deteriorating chimney, what’s the problem … and the fix? Only inspection by a qualified chimney company can tell. Time, though, is of the essence – contact Butler Chimneys before additional (or worse) symptoms appear!