Nashotah Chimney Repairs Needed? It’s Not Hard to Find the Symptoms

Evidence that a Nashotah home’s chimney needs repairs isn’t hard to identify.

Bricks, or chips from bricks, on the ground next to the chimney. Discoloration of remaining bricks in the structure. Noticeable gaps between bricks. Efflorescence – a white, chalky powder – coating your Nashotah chimney’s exterior.

Inside the house, staining or efflorescence inside the fireplace is a warning, too.

Each sign might have a different cause. Hesitating to act isn’t wise, though. Issues can quickly worsen. The first step is a chimney and fireplace inspection by Butler Chimneys, the top chimney sweep company in Nashotah.

The underlying reason in nearly every chimney problem is water. Often the cause is cracked or damaged flue tiles inside the chimney, which allow moisture to escape into the chimney cavity. If a water heater vents into the chimney, the situation can be far worse. Either way, problems ensue once moisture has direct contact with masonry.

Gaps in a chimney – from absent bricks, or failed mortar joints – are major warnings. Nashotah rains can directly penetrate inside the chimney cavity, making a bad scenario far worse.

The initial step is to address root causes. If flue tiles have lost their structural integrity, putting in a stainless steel chimney liner usually stops internal moisture problems. The harm to the chimney remains, though.

Tuckpointing - grinding out and replacing deteriorated mortar – is occasionally all that’s needed. Adding optional ChimneySaver water repellent tacks five years onto Butler Chimneys’ regular five-year warranty, guaranteeing a decade of protection from the elements.

If the source of water leakage is a cracked chimney crown, two options are available. A stainless steel chimney cap can be mounted atop the crown, forming an “umbrella” above the chimney. Or, if the crown is too damaged, a new one is poured.

If a chimney is beyond restoration, a full or partial rebuild is in line. A masonry project runs three to five days; for appliance chimneys, usually one day. You and your Nashotah neighbors can expect scaffolding to be erected, or a temporary rooftop construction station built.

The chimney is reconstructed with fresh bricks and new mortar to building code height. Butler Chimneys works to match colors of new bricks to originals; bricks can be stained, if needed.

A new 5-inch-thick concrete crown is poured on top. The crown features a 2-inch overhang to keep water off the new chimney beneath. Your new chimney is as beautiful as it is functional!

If you detect indicators of a failing chimney, what’s the issue … and the fix? Only inspection by a qualified chimney company can find the answers. Time, though, is of the essence – contact Butler Chimneys before more (or worse) symptoms show up!